6-51mm Steel Wire Hose Crimp Tool P32 Hose Crimping Machine

Product Description

 

TECHNICAL DATA							ES
Max hose size							2"6S
Swaging range(mm)							Φ 6-87
Master die shoe length(mm)							85
Standard voltage							380V/50Hz
Motor power							4kW
Optional voltage &motor							220V/2.2kW
Pump(l/min)							19L
Number of swagings/hour							1000
Noise level (dB)							70
Max opening(mm)							Φ+34mm
Crimping force(kN)							5260
Electric limit switch							included
Electronic control							included
Electric pedal							included
Manual change							included
Dimensions LxWxH(mm)							650x500x1300
Weight without oil							350Kg
Dispenser							Optional
Quick change							Optional
Longer							Optional
Special dies							Optional

 

Main Feature:

1. Microcomputer Control, Taiwan's Hydraulic System;

2. Overall replacement of mold;

3. Extended mold;

4. Its motor for driving the knife is easily controlled using a foot pedal which allows the operator to use both hands for guiding the hose through the process.

5. Simple structure, easy to operate and maintain.

 

Notices
1.When buckling, make the joint to locate the mould center as much as possible, the joint is not buckled on the hex nut.
2.Prevent tool and other foreign matter from entering the locking head.
3.After the work is finished for each time, the eight-block mould base must be made to extend to the greatest extent, this can make the spring to be at extension status. If not, the spring will be damage.
4.When working, the hand should not stretch into the locking head.
5.The power supply must be switched off when maintenance is done.

Maintenance and Care
Maintenance
The hydraulic oil in the oil tank should be frequently checked, if oil amount is found to be insuf- ficient, the oil shall be timely supplemented. If the oil liquid is polluted, it shall be filtered or replaced.
The locking head shall keep internal cleanliness. Avoid the foreign matters during processing to enter into the locking head oil cylinder via the mould to affect the normal use. Wipe out the foreign matters, which are brought by the mould body in time when buckling the joint.
Frequently fill suitable grease into the mould body for lubrication.


Promise
We will provide a guarantee to keep the machine in good repair within 12 months from the day when the machine is purchased. All fitting troubles will be free of charge repaired (or replaced if necessary) during the guarantee period. The damage resulted from improper use o accident damage does not belong to free of charge repair range.

The Packing List
1.The high pressure locking tube machine in model DX 68 one set
2.Mold (Total 10 Sets)Φ6 1 set
Φ10 1 set
Φ13 1 set
Φ16 1 set
Φ19 1 set
Φ22 1 set
Φ25 1 set
Φ32 1 set
Φ38 1set
Φ51 1set

Troubleshooting

 

Trouble phenomena	Trouble reason	Eliminating method
Machine has not action	Oil tank has not been filled with oil	Fill oil as per requirement
	Motor rotation direction is not correct	Regulate two phase lines
	Electric trouble	Overhaul electric circuits
Scale is damaged	The scale is fastened on the oil cylinder end face by the screw	Regulate the scale as per the instruction to make scale to telescope freely
	Conductor at scale location is connected with scale	Anew connect the scale conductor to make it to be insulated from scale base
	Electric trouble	Overhaul electric circuits and electric elements
	Scale conductor cutting	Anew connect scale
	System pressure is excessively low	Adjust buckling pressure-regulating valve
No buckling	The valve core of solenoid reversal valve is seizured by foreign matters	Dismount solenoid reversal valve, use gasoline to clean the valve core.
	Electric trouble	Overhaul electric circuits
Mould is not opened	Opening mould pressure is excessively low	Adjust opening mould pressure regulating valve
	Electric trouble	Overhaul electric circuits
Big noise	Installation is not stable	Conduct horizontal stable installation
	Hydraulic oil is excessively dirty	Filter or change it
	Filter is blocked	Use gasoline to clean the filter
Mould base crawls	Gas in the hydraulic oil has not bee exhausted completely	Suitable unscrew the bleed screw, make the piston in the oil cylinder to move back to last position to exhaust gas, then screw down bleed screw.
	Lubrication is poor	Smear grease on the working inclined face of mould base
Oil leakage	Joint is not tightened closely	Tighten the oil pipe joint
	Sealing washer is damaged.

 

A parameter list of the tooting and the press force for every type of rubble tube(for reference)

order	Inner diameter of the rubble tube		Outer diameter of the rubble tube	Used tooting	Half locking & pressing meter pressure MPa	Whole locking & pressing meter pressure MPa
1	Φ6		Φ15 Φ17	Φ15	5.5 6	6~8 9~11
2	Φ10		Φ19 Φ21	Φ21	6.5~7 7.5~8	10~11 13~16
3	Φ13		Φ23 Φ25 Φ27	Φ25	8.5~9 10~11	14~17 15~18
4	Φ16		Φ26 Φ28	Φ28	9~10 10~11	15~18 18~22
5	Φ19		Φ29 Φ31 Φ35	Φ30	9 11~12 22~24	15~17 20~22 29~31
6	Φ22		Φ32 Φ34 Φ38	Φ34	12~13 14~16 20~25	17~19 19~21 25~30
7	Φ25		Φ36 Φ38 Φ42	Φ38	10~11 15~16 26~28	16~18 20~24 28~32
8	Φ32		Φ44 Φ46 Φ50	Φ42 Φ45	12~13 16~18 32	18~22 30~34 32~38
9	Φ38		Φ50 Φ52 Φ60	Φ50 Φ55	14 20 26~30	22~26 28~32 44~48
10	Φ51		Φ63 Φ65 Φ69	Φ60 Φ65	25 30 35	26~28 40 48

 

Is there any other type machine I can choose?

We offer various types of hose crimping machine. If you are interested in any one, Any questions are welcome.

 

 

FAQ:

 1. What level of service do you provide ?

*Your inquiry will be replied in 24 hours.

*Eight continuous years as an ****** Gold supplier and more than 25 years industrial technology and manufacturing experience .

* We offer free spare parts and service within 14 month warranty period.

* Technology Support by providing operation training videos .

* Professional after-sales service team.

* Give reasonable offers with the best quality.

2. What is our advantages?

* Competitive price: We can meet your budget and best-selling business very well.

* OEM Accepted: We can produce customized design.

* Good Service: We treat clients as friends and provide problem solving anytime you need.

* Good Quality: We have strict quality control system. Good reputation in the market.

* Fast & Delivery: We have big discount from forwarder (Long-term Contract).

* Door To Door Service.

3.  Can you customize the machine for the customer?

Yes. We can, we also provide OEM for customers; If you need customized services, please contact us

4.  What is the MOQ?

We usually provide 1 set for customers to test.